Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 05-01-2005, 05:09 PM   #1
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default Dodgy workplace antics!

Feathers' story about the Coke all over the floor inspired me.....

Tell us about funny/interesting/dodgy workplace antics you get up to!
(just don't incriminate yourself, dont name your workplace etc)

One of our nasty little tricks was played on one of the nightfillers who, well, lets just say thinks he should be in the manager's chair rather than offloading dog food. He loves his chocolate cakes, so we had the baker make him a 'special' one, and left it in the staffroom - needless to say the mens room was in use for a while after that.

Another one my boss told me about was to use the hygenic gloves. You put one on, grab a piece of ham and some sauce, , wrap the ham around one of the fingers and give it a good coating of sauce. It's a good test to see which of the medically trained staff are up to the job!
__________________
RAM 1500
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 05:29 PM   #2
mick.wheelz
Regular Member
 
mick.wheelz's Avatar
 
Join Date: Dec 2004
Posts: 442
Default

I work at a seedling nursery, so one day me and my mate jono were dipping trays in the spore kill to clean them... one of the other guys, charles was being a tool so jono picks up a hand full of mud from off the ground arround the sporekill vat and throws it at him, then its on for young and old... we ended up having a 2hr mud fight when we were supposed to be working...
__________________
Project 5S-FTE - JDM Vitz
mick.wheelz is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 05:40 PM   #3
dansedgli
FF.Com.Au Hardcore
 
dansedgli's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
Default

Once when I worked at KFC I had to clean the big chicken trays. They were greasy as and filled the sink with a layer of grease about an inch thick.
One night we had a food fight after we closed and a hot chick threw a little bit of gravy on me so I picked her up and dumped her in the sink.

It was pretty funny at the time, the who was a bit of a tool had to drive her home it it wrecked his interior.
A few weeks later I ended up hooking in with her so it wasnt all bad.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi.
dansedgli is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 05:40 PM   #4
Tote
FF.Com.Au Hardcore
 
Tote's Avatar
 
Join Date: Jan 2005
Location: Near Canberra
Posts: 882
Default

When I was a young bloke...
Being in the electronics industry (and a Govt Department) we used to get large rolls of cleaning cloth which were about 400mm across and woven into a tube, similar to the polishing cloth you can buy at auto stores.
It was a right of passage for the apprentices to be "cheeseclothed" - get a 6ft length of cloth, tie a knot in the end and drop it over unsuspecting apprentices head whilst your partner in crime picked him up and tied the other end, carry said apprentice outside and watch them wriggle around until they bit a large enough hole in the cloth to escape.
Dont think OH&S people would like it these days though....
Regards,
Tote
Tote is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 06:42 PM   #5
Feathers
Lucifer's Angel
 
Feathers's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 5,282
Default

Hehe, I'll add another story here.
A few months ago I had our Area HR dept annoying me about taking a "promotion" that I didn't want. I was moved temporarily to another store, and when I came back we had a new store manager.
This guy is an absolute turd. He's been pulled from other stores for being nasty to staff.
My first day back he wanted to "remind" me about what is expected from me in my job.
Funnily enough we didn't see eye to eye on it and I walked out of his office, slamming the door behind me.
That must have snapped something in the lock, because 20 minutes later when he wanted to leave the office I heard the door being rattled and pulled at.
Then started the knocking, and shouts of;
"Hello? Hello? Is there anyone there? Can someone open the door please?" :
There were 3 people in my office right next door, and none of us could stop laughing long enough to go and open it. All in all he was stuck in there about 40 minutes.

Not only does he help me out now, but he even calls me "my friend". :Reverend:
__________________
SINISTER BA XR6
Blueprint, manual, 4490's, Redback 2.5" dual exhaust, BA Typhoon rims, tint, fog light covers, BF tailights, blue illuminated window switches, Ghia bootlid carpet, lower grille, FPV door spears, steering wheel & interior bits, XR6T + F6 intake, K&N filter, Typhoon spoiler, tuned, sway bars, custom angel eyes & plates..YUM!

If there's one thing guys in Holdens hate more than being beaten by a Ford...
It's being beaten by a girl driving a Ford
Feathers is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 06:46 PM   #6
smciner1
Detroit Locker Equiped TM
 
smciner1's Avatar
 
Join Date: Dec 2004
Location: Area 51 (tm)
Posts: 4,928
Default

Quote:
Originally Posted by the_wheel_man
we ended up having a 2hr mud fight when we were supposed to be working...
/me thinks this would be much more interesting if they were female.....

:
__________________
Apollo Blue 1974 XB Falcon GT, 557 HP
Blue Pearl 2004 BA FPV GT, 290 kW

Quote:
Originally Posted by MRJUCY
Simple give the car a rev & have a listen a Windsor makes a sort of wheezy drone similar to an angry Hugh Grant when a Clevo will sound like Satan has woke up with a hangover & realized he is out of coffee & cigarettes
Falcon GT Club of Geelong.
http://www.facebook.com/FalconGTClubGeelong
smciner1 is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 07:14 PM   #7
tickford2001
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,647
Default

Quote:
Originally Posted by Feathers
Hehe, I'll add another story here.
A few months ago I had our Area HR dept annoying me about taking a "promotion" that I didn't want. I was moved temporarily to another store, and when I came back we had a new store manager.
This guy is an absolute turd. He's been pulled from other stores for being nasty to staff.
My first day back he wanted to "remind" me about what is expected from me in my job.
Funnily enough we didn't see eye to eye on it and I walked out of his office, slamming the door behind me.
That must have snapped something in the lock, because 20 minutes later when he wanted to leave the office I heard the door being rattled and pulled at.
Then started the knocking, and shouts of;
"Hello? Hello? Is there anyone there? Can someone open the door please?" :
There were 3 people in my office right next door, and none of us could stop laughing long enough to go and open it. All in all he was stuck in there about 40 minutes.

Not only does he help me out now, but he even calls me "my friend". :Reverend:
hahaha some great stories but this one definately takes the cake (preferably the one without the 'added extras'!
__________________
Gone cruising
tickford2001 is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 07:19 PM   #8
Psycho Chicken
Banned
 
Psycho Chicken's Avatar
 
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
Default

We've got the standard guy who scared of spiders, so he cops every spider we find in the workshop. In fact, any dead animal we find full stop. Pieces of mop on his shoulder work wonders too.
Psycho Chicken is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 07:32 PM   #9
mick.wheelz
Regular Member
 
mick.wheelz's Avatar
 
Join Date: Dec 2004
Posts: 442
Default

Quote:
Originally Posted by smciner1
/me thinks this would be much more interesting if they were female.....

:
welll... charles has moobies™ is that close enough for ya?
__________________
Project 5S-FTE - JDM Vitz
mick.wheelz is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 09:34 PM   #10
Sylox
Uterus M.I.A.
 
Sylox's Avatar
 
Join Date: Dec 2004
Location: Gold Coast
Posts: 1,459
Default

I work in a Shed detaling cars and fixing POS bomb's.

We shoot rivets out of the air gun at each other
Make 1.25 coke bottle rockets and shoot them across the esate
The spray painters Van quite often gets its tailshaft zip tied or wired with a bolt on the end.
Smoke bombs in his muffler
stick bombs taped to his brake pedal
grease under the door handles
silicone in the window cleaner

Etc etc We play up All the time lol
Sylox is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 09:47 PM   #11
BA GT-HO
Bring back Ambrose!
 
BA GT-HO's Avatar
 
Join Date: Dec 2004
Location: Eau Rouge
Posts: 1,248
Default

We have this ****er of a leading hand at my work who thinks he is better than everyone. Anyway, a bloke was leaving so thought he would leave a nice present in the leading hands big tool box (one of those multi draw ones on wheels). He filled it literally to the brim with filthy, filthy grease and brown ink. (Think axle grease) Funny part was the leading hand was on annual leave so only found it 3 weeks later. It is still filled with crap as he is trying to find who did it so they will have to clean it by hand. Pity that person is in another state..
BA GT-HO is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 10:12 PM   #12
Thunder Kiss
Regular Member
 
Thunder Kiss's Avatar
 
Join Date: Dec 2004
Location: Geelong
Posts: 272
Default

A fairly conservative (and very religious) work colleague who has a wife named Lorainne was given a message that his wife called from "some shop" in town and to call her back on the number given. After three attempts, and the guy swearing black and blue his wife was there, no one at work could keep a straight face and he was let in on the joke.
He was actually calling a local Geelong house of ill repute, named, "Lorraine Star".
Thunder Kiss is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 10:41 PM   #13
Feathers
Lucifer's Angel
 
Feathers's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 5,282
Default

My family owns a bus company, and when we took on an apprentice, the guys would send them on the obligatory errands for left handed hammers/screwdrivers etc.
One guy (who is still with us, and has been for over half his life) was sent to buy two tone green striped paint for the coaches.
He returned from the supplier with 2 tins of green paint, and explained that they were out of stock of the striped paint, but he got the two tins so we could mix it ourselves.
My Dad had no comeback for that.
But at least the guy got paint we could use, even if we didn't need it then.
__________________
SINISTER BA XR6
Blueprint, manual, 4490's, Redback 2.5" dual exhaust, BA Typhoon rims, tint, fog light covers, BF tailights, blue illuminated window switches, Ghia bootlid carpet, lower grille, FPV door spears, steering wheel & interior bits, XR6T + F6 intake, K&N filter, Typhoon spoiler, tuned, sway bars, custom angel eyes & plates..YUM!

If there's one thing guys in Holdens hate more than being beaten by a Ford...
It's being beaten by a girl driving a Ford
Feathers is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 10:50 PM   #14
Toolman
Marmindie
 
Toolman's Avatar
 
Join Date: Dec 2004
Location: Noosa Australia
Posts: 79
Default

Black in black and white days when I was an apprentice, I was amazed at the amount of pilfering that occured on a daily basis.

Some of the tradesmen had to bring trailers to work as they couldn't get enough company product in their boot.

As an apprentice it was my job to run erands between floors on a spiral stair case... one morning I flew down the staircase to have it fall and bang around the walls with me trapped inside, one of the tradies had removed the coach screws to build his kids a swing and ladder.

The same tradie on occasions rode his pushbike to work. One morning gettling complete drenched by an unexpected rain storm, he took off his jeans and placed them on a casting press, which bent metal at very high temperatures and pressures (10 ton in old money)... an apprentice who was still traumatised after an near death experiance in a stairwell pressed the green button and reduced his jeans to threads. He peddled home in his jocks.

I miss the old days.
Toolman is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 10:58 PM   #15
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

my problem is that, until recently, I've always worked for small IT companies so I never really had many co workers. Therefore my clients cop it...usually when they annoyed me.

I did have a coworker in the Qld office for a while. A friend of the company owner he was hired as the hardware tech to install and service the timekeeping hardware for the software we used. Problem was he was an idiot who had no idea, he was hired cause he was a mate of the company owner and thrown at us to train from scratch.
One piece of hardware was a TCPIP addressable unit that allowed the software to talk to the hardware over LANS and WANS. Being a typical piece of hardware it did not run on 240v but a 9v stepdown transformer (like a phone charger).
One day, being sick of him being totally hopeless (this is 9 months after he started), he asked how to program the IP address for the 32342nd time. I told him to plug it in and gave him the power cord off the printer instead as I knew it had the same size plug.
Watching his face as $1000 worth of hardware went POP right in front of the state manager was worth it. Watching him try to explain what happened made my ribs sore from holding the laughter.
He resigned a few weeks later.

Only other real bad thing I did was at a clients. They were giving me the irrits as I had a hangover and didnt want to be there. They wanted me to move the software to a new server and gave me a 19yo techo geek to help (I never touch a client server alone, too much can go wrong that I'd be blamed for). The software used a hardware dongle (like a plug that goes into the printer port on the pc) as a security device. As the new server didnt have a printer LPT port I gave it to the geek to put on. He just reached over the back, felt what he thought was a port, and tried to plug it in. Unfortunatly for him it was something to do with the scuzzy drives and the entire raid array of HDD just died on the spot.
They called the techs, I went home.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.

Last edited by Casper; 05-01-2005 at 10:59 PM.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 11:03 PM   #16
Psycho Chicken
Banned
 
Psycho Chicken's Avatar
 
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
Default

Quote:
Originally Posted by Thunder Kiss
A fairly conservative (and very religious) work colleague who has a wife named Lorainne was given a message that his wife called from "some shop" in town and to call her back on the number given. After three attempts, and the guy swearing black and blue his wife was there, no one at work could keep a straight face and he was let in on the joke.
He was actually calling a local Geelong house of ill repute, named, "Lorraine Star".
haha the year 12's above me did that to the vice-principal, telling him it was a potential new student.
Psycho Chicken is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 11:28 PM   #17
banarcus
hmm eyebrows
 
banarcus's Avatar
 
Join Date: Jan 2005
Location: Lower Hunter Valley, NSW
Posts: 2,391
Default

It was always fitter-machinists versus the boilermakers where I used to work. As a fitter it was always funny to watch our poor cousins cop the wrong end of a joke all the time. Some of the tricks we did on the boilermakers were:
1) Fart gas inside a tank whilst boilermaker was welding inside.
2) Smear bearing blue on boilermaker's earmuffs and head band on their welding helmets and then watching them poke fun at each other.
3) Smear bearing blue on the black dunny seats.
4) Either stick a frozen welding rod or a few squirts of oil from an oiling can down boilermaker's bum cleavage while he was welding.
5) Put itchy powder down boilermaker's neck while he was welding and then watch him go mad with itchiness.
6) Stick homo porno playing cards on boilermaker's back just before he went up to the shop for smoko.
7) Get out a old rag out of the rag bag that had a few pockets still in the rag. Put in a $5 note in one pocket and $10 in the other. In the 3rd pocket put in smelly rotten stinky stuff like fish oil and then pull out the money from each pocket and then watch boilermaker pinch the rag only for him to put his hand in the rotten pocket.

I even had an apprentice boily stick a centrefold porno on the back of my old esky van. I drove home and only discovered it the following morning. Feeling hard done by I took out a rotten salami out of fridge and while on nightshift, I stuck the salami in the apprentice's kingswood heater box under the dash. I disconnected the heater tap cable so the heaters were always on. He complained the following shift that he a bad stink coming from his vents and that something died in his car. Only when the flies started crawling out of the vents did he pull his dash apart. I still laugh about it lol.
__________________
1999 Range Rover 4.6 V8. Soon to have a new blue oval bent eight.
banarcus is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2005, 11:35 PM   #18
FordFan86
meow
 
FordFan86's Avatar
 
Join Date: Dec 2004
Location: Where the Pirates are.
Posts: 2,744
Default

: well this thread has kept me amused for 10 minutes... all greta reading thanks guys
FordFan86 is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2005, 12:02 AM   #19
RED_EL_XR8
Banned
 
RED_EL_XR8's Avatar
 
Join Date: Dec 2004
Location: Not suffering Fools Gladly!!
Posts: 2,864
Default

Have a million. but the last one was.

We have the misfortune of working from time to time with the "pommy git from hell" this guy has all the appeal of a camel poo in a bear trap.
Hi company Commo wago has had this unfortunate knock whick has been there almost since the thing was new. In stop'n'go traffic its a "wrk" "thoomp" ad nauseum.
Sydneys Largest Holden dealer has looked at it on 3 previous occasions but no-one has ever been able to isolate the fault.

When the car was near new and we all had sat through one too many tyrades of cockney banter, one of the boys slipped out to the car park, quick peel back of the lower window seal and dropped in a CD. (company badged of course.)

Given up on ever finding the noise, said git one day illicited the help of another colleague to find out why sometimes, the kids couldn't wind the right rear window down fully. And there was the noise source inside the door.

I was questioned as to whether I was responsible. My reply was "hell no! I just came up with the idea." Nearly two years it was there.! :
RED_EL_XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 06:25 PM   #20
RED_EL_XR8
Banned
 
RED_EL_XR8's Avatar
 
Join Date: Dec 2004
Location: Not suffering Fools Gladly!!
Posts: 2,864
Default

Come on guys, a new year and new and creative ideas required. :
RED_EL_XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 06:47 PM   #21
Feathers
Lucifer's Angel
 
Feathers's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 5,282
Default

That last story reminds me of something else I did...

The son of one of the guys who used to work at our bus company bought a car at a police auction, and was around showing it off. He thought he was teh shizznit and never failed to remind us all how much his new car rocked.
After about 6 months of this I finally got annoyed at it and decided to teach him a lesson.
While the car was parked at the depot for a few days (defected) I found a marble, pulled back the driver's door lining and dropped it in.
He pulled the car apart looking for the source of the rattle, and after about 6 weeks, gave up, and sold the car. :hihi:
__________________
SINISTER BA XR6
Blueprint, manual, 4490's, Redback 2.5" dual exhaust, BA Typhoon rims, tint, fog light covers, BF tailights, blue illuminated window switches, Ghia bootlid carpet, lower grille, FPV door spears, steering wheel & interior bits, XR6T + F6 intake, K&N filter, Typhoon spoiler, tuned, sway bars, custom angel eyes & plates..YUM!

If there's one thing guys in Holdens hate more than being beaten by a Ford...
It's being beaten by a girl driving a Ford
Feathers is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 06:52 PM   #22
RED_EL_XR8
Banned
 
RED_EL_XR8's Avatar
 
Join Date: Dec 2004
Location: Not suffering Fools Gladly!!
Posts: 2,864
Default

Quote:
Originally Posted by Feathers
That last story reminds me of something else I did...

The son of one of the guys who used to work at our bus company bought a car at a police auction, and was around showing it off. He thought he was teh shizznit and never failed to remind us all how much his new car rocked.
After about 6 months of this I finally got annoyed at it and decided to teach him a lesson.
While the car was parked at the depot for a few days (defected) I found a marble, pulled back the driver's door lining and dropped it in.
He pulled the car apart looking for the source of the rattle, and after about 6 weeks, gave up, and sold the car. :hihi:
Marble is good!
RED_EL_XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 02:18 AM   #23
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Latest one tonight - call an employee on their mobile from the manager's office, tell them that first of all they shouldnt be on the phone whilst on company time, secondly that they're fired.

Done it to 3 people, all 3 of them have walked out. boy am i going to cop it tomorrow. :nutsycuck
__________________
RAM 1500
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 02:37 AM   #24
champsky
THCC Motorsport member 1
 
champsky's Avatar
 
Join Date: Dec 2004
Location: the ghetto....no im being serious!
Posts: 1,139
Default

Quote:
Originally Posted by back2thefutura
Latest one tonight - call an employee on their mobile from the manager's office, tell them that first of all they shouldnt be on the phone whilst on company time, secondly that they're fired.

Done it to 3 people, all 3 of them have walked out. boy am i going to cop it tomorrow. :nutsycuck
lmao! thats hilarious bro lol

wouldve loved to see their faces when you did that lol

10 points for effort lol
__________________
Southcyde Designs<------click here :

Member of the MTAS
Founder of TTM (team twink motorsport)

Founder of the AFFDDPS (Australian Ford Forums Drink Driving Punishment Squad)
champsky is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 11:40 AM   #25
Psycho Chicken
Banned
 
Psycho Chicken's Avatar
 
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
Default

We ran out of roll cabs at work for the mechanics/apprentices a while ago. A few of us have our tool boxes on 44 gallon drums.

Question; We've got a hopeless new first year. Should I weld his tool box to the drum? hehehe
Psycho Chicken is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 11:41 AM   #26
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Quote:
Originally Posted by Psycho Chicken
We ran out of roll cabs at work for the mechanics/apprentices a while ago. A few of us have our tool boxes on 44 gallon drums.

Question; We've got a hopeless new first year. Should I weld his tool box to the drum? hehehe
You need to ask?
A few spot welds are always fun.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 12:49 PM   #27
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Well. My team is not so pleased with me (the 3 who got 'fired' anyway), the rest found it hilarious. Even the manager said to me this morning "if they're that stupid they probably dont deserve to be here" - and i saved him some wages so im in his good books lol.

PC, Weld it to the drum, and then spot weld the lid of the toolbox on. Either that, or coat the bottom of the inside of the box in liquid nails then place the tools back in one by one.
__________________
RAM 1500
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 01:39 PM   #28
Psycho Chicken
Banned
 
Psycho Chicken's Avatar
 
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
Default

Naw I don't wanna make it obvious. When he eventually gets the ****, I want to laugh as I watch him chiseling spot welds off so he can get his toolbox into his car.
Psycho Chicken is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 01:49 PM   #29
RED_EL_XR8
Banned
 
RED_EL_XR8's Avatar
 
Join Date: Dec 2004
Location: Not suffering Fools Gladly!!
Posts: 2,864
Default

Another gem for those with some electronic skills. 555 timer, relay and a small jiffy box, relay across points. Set up with 5 minutes off, 1 minute on duty cycle.

Did a cabover mitsu van one chrismas eve. made it a long drive from Botany to St Marys in traffic. The battery and starter motor got a work out. :evilking:

Last edited by RED_EL_XR8; 08-01-2005 at 01:52 PM.
RED_EL_XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 04:55 PM   #30
tickford2001
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,647
Default

Quote:
Originally Posted by RED_EL_XR8
Another gem for those with some electronic skills. 555 timer, relay and a small jiffy box, relay across points. Set up with 5 minutes off, 1 minute on duty cycle.

Did a cabover mitsu van one chrismas eve. made it a long drive from Botany to St Marys in traffic. The battery and starter motor got a work out. :evilking:
hahaha now that is cruel! but funny as!
__________________
Gone cruising
tickford2001 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:17 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL