MPI Conversion

snypereb · 24-01-2006, 09:23 PM

Hey guys im in the process of my MPI conversion considering all the people who gave me hell for the CPI.Thanks guys gave me some incentive.

Today i got an injector manifold (thanks damo) came with injectors and loom I know i need an ECU and air box is there anything else that i need?

And also this manifold came out of an EA will the loom be compatible to my EB1?

How many people have done this conversion any tips on problems to watch out for?

Jason[98.EL] · 24-01-2006, 09:24 PM

what trans ya have

snypereb · 24-01-2006, 09:27 PM

4 speed auto mate

InitialD · 24-01-2006, 09:29 PM

You will need a Series 2 EA MPFI loom or EB1. Same thing anyway. Its just suited to your 4 speed auto. Just look on the loom for a 4 pin round plug with blue wires.

IF it does, you have a Series 2 loom.

Also if you need a ECU, i have a EB1 ECU that I am not using. Feel free to PM me if your interested

Jason[98.EL] · 24-01-2006, 09:31 PM

i have one here and the rest of the conv kit mate

snypereb · 24-01-2006, 09:45 PM

What else do i need now?
I have:ECU
Manifold injectors and loom

InitialD · 24-01-2006, 09:48 PM

Quote:

Originally Posted by snypereb

What else do i need now?
I have:ECU
Manifold injectors and loom

You will need

MFPI airbox and snorkle and rubber TB to Airbox pipe
MPFI Fuel pump (ive got one here you can have, ill give it you when you get the ECU)
MPFI Dizzy, Would recommend to do it since everything is off the car but you can use the CFI one apparently. Didnt work for me thou
MPFI A/C Compressor bracket if you have A/C on your car.

snypereb · 24-01-2006, 09:54 PM

Sweet as mate thanks did you want any extra for the pump
How much will these things cost?

InitialD · 24-01-2006, 10:08 PM

Quote:

Originally Posted by snypereb

Sweet as mate thanks did you want any extra for the pump
How much will these things cost?

well your MPFI dizzy is about $30, Airbox and snorkle with TB pipe $20-$30, A/C bracket - $unknown. Thats from Pickapart or Jolly Rodgers

Damo · 24-01-2006, 10:09 PM

I have a dizzy I forgot about it today, and i think i have the AC bracket, i'll have a look for ya tommorrow. You'll also need a TPS too as that is missing from the manifold.

snypereb · 24-01-2006, 10:12 PM

Might get a brand new dizzy! To be safe got one from jollys and it was abit dodgy! Heljas do you have the airbox and snorkle with the TB pipe? How much you want for it if ya do?

snypereb · 24-01-2006, 10:13 PM

Sweet mate that dizzy would be great and the A/C bracket thats awesome!
Whats the TPS?

Damo · 24-01-2006, 10:21 PM

TPS is the Throttle Position Sensor, it screws in the side of the throttle body, I bet Mick has one of these.

:

snypereb · 24-01-2006, 10:29 PM

How much is this part?
Do you have one Mick?

InitialD · 24-01-2006, 11:45 PM

Quote:

Originally Posted by snypereb

How much is this part?
Do you have one Mick?

Yeah im bound to have a dual EA2/EB1 TPS sitting around :P Ill have a look while im throwing alot of junk into the skip. Speaking of which, damo is that TB EA s2 or S1 style?

Brent79 · 25-01-2006, 01:48 PM

u will need the whole throttle body if the replacement one doesnt have a duel TPS. The shaft is longer for the duel gang TPS.

Brent

snypereb · 26-01-2006, 10:38 PM

Can you elaborate more on that brent?
Did you have that part InitialD?

Jason[98.EL] · 27-01-2006, 11:59 AM

no snyper i was going to put a pod filter in a custom box

Brent79 · 27-01-2006, 03:39 PM

i mean if u got a MPI manifold thats was from a manual or 3 speeder and u currently have a 4 speed in yer car then u will need a different throttlebody coz the earlier ones dont have a long enuf butterfly shaft to run 2 TPS. Will only operate 1.

Brent

InitialD · 27-01-2006, 06:35 PM

The Throttlebody that Damo has is a Series 2 style. I have a dual Series 2 TPS setup here aswell.

snypereb · 27-01-2006, 09:27 PM

ok cool looks like you have everything that i need mate PM me tell me how much you want for all this!!
What was this about the pod jas?

locknut · 15-02-2006, 11:32 PM

What's happening? You still doing this? I want to do this in the future..

snypereb · 15-02-2006, 11:36 PM

Yeah definately still up for it I am just waiting to get paid so i can get the stuff off of a few guys on the forum!!! Where are you from mate we should have a working bee and do two cars in a night lol!!!!

locknut · 15-02-2006, 11:40 PM

LMAO! Would be good aye? I'm in ACT, but same issue, needing funds and RWC before any more fun stuff..

snypereb · 15-02-2006, 11:44 PM

Yeah i think gthofan is coming around in a few weeks to help me do it! Just gotta pick up this stuff. There is another thread i have started that has the conversion process in it!!

Damo · 15-02-2006, 11:45 PM

Shaun i have MPI dizzy and compresor bracket hear waiting for ya mate. $10 or a pack of winnie blues. ;)

Damo · 15-02-2006, 11:47 PM

and i'm willing to lend a hand too, so long as i'm not working on my EB but hopefully it will be fired up on the weekend. Let me know about those parts.

Cheers

snypereb · 15-02-2006, 11:49 PM

Sold mate no probs..........20s?

locknut · 15-02-2006, 11:51 PM

fk wat a deal! Keep us posted, or what's the link for the other thread.. Can we merge it?

snypereb · 15-02-2006, 11:59 PM

Here you mate!!
have a read of this mate http://www.ford-tech.com/articles.php?articleId=46 it's a pretty good guide by the looks of it.