|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-03-2009, 08:17 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2007
Location: Auckland
Posts: 54
|
I need to fit a fuel filter for my XB. I have fitted a AU XR8 and I am not sure where to put the fuel filter. I have a external electric pump below the rear seat. Should it be before or after the pump? I have picked up a plastic filter from Super cheap, I suppose it will be Ok? Cheers Steve
|
||
|
|
|
09-03-2009, 08:29 PM
|
#2 | ||
|
Sick Puppy
Join Date: Jul 2006
Posts: 1,963
|
When I put the 5.0 EFI in my Maverick I put a filter between the tank and the low pressure pump. Then one between the surge tank and the high pressure pump. These are just the basic garden variety plastic 3/8 line filters.
Then I put the high pressure efi filter (the tin can type) in the engine bay just before the injector rail. Cant have enough filters. Pumps and injectors are too dear to take the risk! |
||
|
|
|
|
09-03-2009, 08:44 PM
|
#3 | ||
|
Regular Member
Join Date: Jul 2007
Location: Auckland
Posts: 54
|
Is this the tin can type available from Super Cheap. I do have one but was unsure if it was different than the plastic type.
|
||
|
|
|
Filter location for EFI pump on XB
Linear Mode
