|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
13-11-2006, 12:38 PM
|
#1 | ||
|
EB II
Join Date: Oct 2006
Posts: 676
|
I simply have nfi about putting these on and if I tried it myself I have a feeling I'm gonna **** things up so to be safe I'm willing to pay someone to put these in for me preferably someone who has done this before on an e-series... I don't mind driving to where you are so long as you're no more than 30mins away from Parramatta.
PM me your offers cheers guys :voldar02: |
||
|
|
|
13-11-2006, 12:41 PM
|
#2 | ||
|
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
it is really simple, honestly
pull the wire off the back of the headlight and the blinker from inside the bonnet. 4 x 8mm bolts hold the headlight in, 2 in front, 1 behind and the other on the outside beside the radiator. pull the headlight out 2 or 3 phillips head screws hold the blinker to the headlight. swap it over, put it all back in and do up tight. simple. Alot of people go to the local pick a part wrecker and practice removal there on a wrecked car, then if it breaks who gives a **** 
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
|
|
|
|
13-11-2006, 12:42 PM
|
#3 | ||
|
EBII XR6
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
|
OMFG!!!!!! mate seriously this is the easiest mod you could ever do and theres not a chance in hell you could stuff it up! theres two or three screws in the front of the headlight, one facing down behind it and one in the side next to the radiator. then just un plug the cable and lift out the whole headlight, three screws hold the indicator on and change over the indicator and repeat this process!!!!!!!
__________________
DEVLXR
|
||
|
|
|
|
13-11-2006, 12:45 PM
|
#4 | ||
|
EB II
Join Date: Oct 2006
Posts: 676
|
LMAO ok ok it sounds a lot easier with step by step instructions
 I'll give it a shot then
|
||
|
|
|
|
13-11-2006, 12:50 PM
|
#5 | ||
|
EBII XR6
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
|
hahaha if you stuff it up it'll be a p i s s e r but theres not a chance you'll be able to!!
__________________
DEVLXR
|
||
|
|
|
Willing to pay someone in Sydney Suburb to put in my clear ED indicators
Linear Mode
