FordMods.com dyno day feedback - 23rd September

Christiaan · 23-09-2006, 07:10 PM

Hey guys.

A few e-series guys headed up to Bayswater, to dynomotive for the fordmods dyno day.

My car:
- Wade 1004 112
- Pacemakers
- 2.5" Exhaust
- T5 Manual

I pulled 139.6rwkw. I was pretty happy with that. For comparisson, John_XR6 got 147rwkw.

PYROAY was there, he got around 330rwkw, but his boost was dropping from 20 to 15 during the run, so he didn't make his full (and best) power figures, but very impressive none the less.

An Ice Mint Silver BA 02 XT Auto with;
- Typhoon airbox/snorkel/lower duct
- K&N panel filter
- 2.5" Redback
- High flow cat
- Pacemaker headers

pulled 178.3rwkw. That was the highlight of the day. Quite an amazing car.

There were some nice cars at dynomotive as well, including a Yellow AU Ex taxi, with a big block V8 + 3000 Horsepower turbo sitting where the old airbox used to be :P. Check out the pics below.

Taxi:
- http://www.yagz.com/images/taxi_1.jpg
- http://www.yagz.com/images/taxi_2.jpg
- http://www.yagz.com/images/taxi_3.jpg
- http://www.yagz.com/images/taxi_4.jpg

Blown SS Ute:
- http://www.yagz.com/images/blown_1.jpg
- http://www.yagz.com/images/blown_2.jpg
- http://www.yagz.com/images/blown_3.jpg

Turbo V6 Rodeo Ute (500rwkw+):
- http://www.yagz.com/images/500_1.jpg
- http://www.yagz.com/images/500_2.jpg
- http://www.yagz.com/images/500_3.jpg

All up, a great day. I was very happy with my figure, considering it's only a second hand $60 wade 1004 112 :P

Cheers,
Yagz

GREERZ_04_BA · 23-09-2006, 07:21 PM

i missed out damm.had the day off work to..

AdzT3-146 · 23-09-2006, 07:32 PM

Yeah it was a good day.

I was pretty pleased with how mine went.

EL XR8 Series 2. - Auto

Mod: Twin 2.25" exhaust from cats-back.

Result:

Christiaan · 23-09-2006, 07:33 PM

Nice solid power curve there adz, and a nice tractive effort curve too!

ORSMEB · 23-09-2006, 07:44 PM

Yeah, was a great day.

Ride:
EBII S XR6 Manual

Mods:
Extractors
High Flow Cat
2.5" Exhaust
Pod Filter

All in all...pretty happy with result when I had no idea what to expect...

**Sorted** · 23-09-2006, 09:55 PM

Damn it - I was going to go down to spectate :(

SpoolMan · 24-09-2006, 12:05 AM

The owner of Dynomotive (Mark) has a TT LS1 Ute did it run on the rollers?

Sundeep · 24-09-2006, 12:12 AM

Damn if I knew it was on today and it was at Dynomotive I would have tried to make it. I wonder the EA is still making the same power lol.

Good work guys!

Sundeep

AdzT3-146 · 24-09-2006, 12:54 AM

Quote:

Originally Posted by SpoolMan

The owner of Dynomotive (Mark) has a TT LS1 Ute did it run on the rollers?

No it didn't get run on the rollers today.

EFFalcon · 24-09-2006, 02:26 AM

my car proved its not dead yet

pulled a respectable 120rwkw on LPG
over a year ago it pulled 122rwkw on LPG when it was tuned AT dynomotive.
since then i've removed extractors so i'm fairly happy

EDXR6T · 24-09-2006, 02:40 AM

Yer was good to catch up with a few ppl

I got a 116.4rwkw which im pritty pleased with

My last dyno run i had up at Hallam got 102rwkw stock as a rock bar the cat bk.
Since then ive put a 5speed in, rebuilt 3.45lsd, EF XR6 cam (Which wouldent be doing alot:P) and allround maintenance.

AU engine hear i come

XRated · 24-09-2006, 02:51 AM

Bugger. I shouldn't have had a big night before :P

That's a very nice figure Yagz.

snypereb · 24-09-2006, 11:29 AM

Well done guys it was good to watch all the cars going on the rollers next time ill put mine on! lol

crannersEL · 24-09-2006, 12:37 PM

Yeah i came down after work with some mates at 3.30, wanted to chuck my car on the dyno as well but tim kaddis (employee i know) said they were finishing up for the afternoon. Always next time i guess!

Paul

Rmyers · 24-09-2006, 02:38 PM

Good day, would've put the car on the rollers if i had any money :P That AU was just insanity, what was it 2500-2600hp??? :O

EFFalcon · 24-09-2006, 02:39 PM

hxxp://www.deleted link/pics/cruises/FMdyno1/

Gubas · 24-09-2006, 03:08 PM

Nice figure Yagz, you bastard, you bet mine :P

My car made 137.4rwkw last dyno day with the same mods, less serpentine conversion and thermos.

Would of been good to slap my car on the rollers to see what power it made with LPG, new cam and stock ignition.

Next thursday I'll find out. The car is getting sorted out then.

Christiaan · 24-09-2006, 06:06 PM

Quote:

Originally Posted by Gubas

Nice figure Yagz, you bastard, you bet mine :P

My car made 137.4rwkw last dyno day with the same mods, less serpentine conversion and thermos.

What can I say? It must have been the install work that made the difference

Damo · 24-09-2006, 09:59 PM

good work guys. My car will be off to dynomotive soon too, but not just for a dyno run. ;)

RG · 24-09-2006, 10:03 PM

Quote:

Originally Posted by Damo

good work guys. My car will be off to dynomotive soon too, but not just for a dyno run. ;)

Mine's off to them in a week or two aswell

, well done guys good to see the E series I6's pulling good numbers.

-jjM- · 24-09-2006, 11:11 PM

well least i cracked 100 this time, least i know exhaust made an improvement on the car

things still running rick, have a bit of a play around wit the car during the week until CVE and see what it says then

also for the people sayin i left with some bird....yes i did, i took her out the other night, boy dose she know how to party

had a great day otherwise