|
21-05-2006, 01:07 PM | #1 | ||
Starter Motor
Join Date: May 2006
Posts: 1
|
Hi guys, does anyone know how I get the inside door panels off to replace the factory speakers in this model of car?
I just got one last week and want to replace the factory speakers, I have already done the head unit which was no major hassle, but I can't seem to work out how to get the side door panel off. I can pull the bottom half out with the clips but it seems to be attached to the top half which won't allow me to get into the speakers. I also undid two of the screws on either side and tried lifting it off but it looks like there is a screw attached from the arm rest which i can't seem to find. any help would be appreciated. |
||
23-05-2006, 02:12 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
can you take a picture of it
i dont know the car it may to have a plastic pop out button or cover over the screw
__________________
My car goes Brumm Brumm |
||
21-05-2007, 10:13 AM | #3 | ||
Regular Member
Join Date: May 2005
Posts: 33
|
i'm probably a year too late but i was doing the exact same thing on the weekend....
You need to pull of the armrest "rubber trim" and you will find 2 additional screws that hold the door trim to the door itself. Took me a while to suss out what was going on. Now onto MY problem... after pulling out the speaker i thought the Laser 2000model speakers were 6"x9", i go and buy a pair of Sony 6"x9" for $57 at JB-HiFi only to find they DONT fit in the door cutout!!! : Does anyone know what speaker size i should be replacing the standard ones with? Cheers AK
__________________
2009 Egos FG G6E |
||