|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-05-2011, 05:50 PM
|
#1 | ||
|
rexnet
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,561
|
What should I gap my vct plugs at? Using platinum plugs.
|
||
|
|
|
09-05-2011, 07:51 PM
|
#2 | ||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
I recommend 1.1 mm if running on petrol - 0.8 for LPG.
If you use the recommended 1.3mm you will overlaod your coil packs as the plug electrode wears away and the gap increases over the life of the plugs. If you are prepared to check and regap your plugs every 10,000km then go for the 1.3mm. For me that negates the benefit of buying platinum plugs which usually don't need to be removed/replaced for at least 50,000km. |
||
|
|
|
Vct spark plug gap
Linear Mode
