Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 08-09-2006, 05:52 AM   #1
sixty9
Starter Motor
 
Join Date: Sep 2006
Posts: 13
Default AU1 extreme rough idle??

hey guys!

I have an extremely rough idle in drive, rough in neutral and in park.
this problem started off with a very minor rough idle , and has worsened over the months. however when you drive along, it is all good, its only when you are idling where its rough.

i have changed sparks, leads, oil, battery so far. the car has travelled 220k's.

when i disconnect the iac connector at idle, the engine turns off? should it do this?

things i havnt done is O2sensor, coilpack, iac??? or could it be my valves?

like to get some idea's or if anyone else has experienced this?

car is also dualfueled gas/petrol and is the same for both!

thanks for hearing me out!

sixty9 is offline   Reply With Quote Multi-Quote with this Post
Old 08-09-2006, 07:35 AM   #2
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

chances are in it the oil filled engine mounts... Change to a set of the rubber EL mounts and the problem will be solved
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 08-09-2006, 10:55 AM   #3
sixty9
Starter Motor
 
Join Date: Sep 2006
Posts: 13
Default

thanks racecraft,
could be engine mounts, but i've done engine mounts about 1yr ago. also, it seems like its about stall on me at idle, and running on petrol i can smell it running rich, strong smell.

any more suggestions?
thanks
sixty9 is offline   Reply With Quote Multi-Quote with this Post
Old 08-09-2006, 12:36 PM   #4
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

a dried out or torn o'ring on an injector

Does it have the same symptoms on both fuels?
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 08-09-2006, 01:02 PM   #5
BlackLS
Guest
 
Posts: n/a
Default

Vaccum?
  Reply With Quote Multi-Quote with this Post
Old 08-09-2006, 07:14 PM   #6
onfire
FF.Com.Au Hardcore
 
onfire's Avatar
 
Join Date: Feb 2006
Posts: 1,078
Default

My 99 Forte was doing the same thing, and I noticed it when it reached its 80,000kms mark.. which is time for a service anyways.

Someone said on here, it could be an issue with the intake.
__________________
FOR SALE: 2 0 0 3 F A L C O N X R 8
http://www.fordforums.com.au/showthr...31#post5041431


onfire is offline   Reply With Quote Multi-Quote with this Post
Old 09-09-2006, 04:41 AM   #7
sixty9
Starter Motor
 
Join Date: Sep 2006
Posts: 13
Default

thanks guys!

i'll check out vacuum, injectors and also engine mounts on the weekend!
i'll post my results in the coming week
i got a feeling could be all 3!

thangs again for the inputs!
sixty9 is offline   Reply With Quote Multi-Quote with this Post
Old 09-09-2006, 11:34 AM   #8
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

The engine should stall if you disconnect the IAC at idle
It's probably a good idea to take it off and give it a good clean out anyway
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 09-09-2006, 02:49 PM   #9
sixty9
Starter Motor
 
Join Date: Sep 2006
Posts: 13
Default

thanks twistedEL!

i'm going give it a good clean out today
sixty9 is offline   Reply With Quote Multi-Quote with this Post
Old 22-09-2006, 04:52 AM   #10
sixty9
Starter Motor
 
Join Date: Sep 2006
Posts: 13
Default

update with rough idle issue

got some time to buy a coil pack from repco $100 new and fit, Charcoal cannister from wreckers (this was a long shot, reading some of the threads, i thought why not!) cleaned iac motor with carby cleaner, cleaned throttle body.

So far car runs much better on idle, it doesht shake as bad on idle, use to shake from side to side. Much better response and acceleration!

There is still a slight tiny shake in it on idle. What is the best way to check to vacuum? as i didnt really check this so far????
sixty9 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:01 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL