Genuine Ford Parts - Page 3

Dingo · 07-12-2020, 03:00 PM

Gday GT

yeah i thort as much , just wanted to check as MC only shows up to 31st of October 2001

thanx again

Aaaaarrrrrrrrrooooooooooooooo

GTLEGEND · 07-12-2020, 03:37 PM

Quote:

Originally Posted by Dingo

Gday GT

yeah i thort as much , just wanted to check as MC only shows up to 31st of October 2001

thanx again

Aaaaarrrrrrrrrooooooooooooooo

Do you know if they are physically different? Maybe compare the part number supplied with one off a vehicle.

You might find they are the same?

Ozboi · 07-05-2023, 08:56 AM

Hi GT

I am after part number, price, and availability for the front hub/bearing unit mounting bolts for a FG Falcon i6 4L 2008, VIN: 6FPAAAJGCM8C75922, Rego OZB01 please.

Thanks
Jason

GTLEGEND · 07-05-2023, 12:17 PM

Quote:

Originally Posted by Ozboi

Hi GT

I am after part number, price, and availability for the front hub/bearing unit mounting bolts for a FG Falcon i6 4L 2008, VIN: 6FPAAAJGCM8C75922, Rego OZB01 please.

Thanks
Jason

Hi Jason,

Part number of the hub to knuckle bolts is W705821S439, $19.50 each and still available. I am sure there are 3 per side required. $10 for tracked postage if need be.

GT

dead_man00124 · 08-12-2020, 10:14 PM

Complete set of rubbers for the doors?
doors and frames

S1 AU Fairmont

also very long shot, can you tell me if the tailshaft is different on a T3 TE/TS50 manual is different to the XR8 manual sedan?

GTLEGEND · 09-12-2020, 12:02 AM

Quote:

Originally Posted by dead_man00124

Complete set of rubbers for the doors?
doors and frames

S1 AU Fairmont

also very long shot, can you tell me if the tailshaft is different on a T3 TE/TS50 manual is different to the XR8 manual sedan?

From what I can find, I could only possibly get both front and RHR on door seals. LHR and all door opening on body seals are no longer available. Just getting confirmation and pricing on the three said seals and will advise.

Yes the shafts are different from a T3 T Series Manual and a XR8 manual. The T series us shaft TAU3 4602 A and the XR uses ERT 4602 A.

Get back to you about the seals.

dead_man00124 · 09-12-2020, 02:04 PM

thanks mate, would be appreciated.

GTLEGEND · 09-12-2020, 07:27 PM

Quote:

Originally Posted by dead_man00124

thanks mate, would be appreciated.

Can get both front on door seals for $45 each and the RHR on door seal for $115 (not sure why the rear is so much more?). Freight of $20 on top if required.

PM me if your interested.

Espec · 12-12-2020, 10:27 PM

Hi GT can i get a price on a SY territory rear console bin latch part no 5R7ZA11675AASH
Cheers Eric

GTLEGEND · 12-12-2020, 10:41 PM

Quote:

Originally Posted by Espec

Hi GT can i get a price on a SY territory rear console bin latch part no 5R7ZA11675AASH
Cheers Eric

Hi Eric,

$47 + freight if required.

Cheers,
GT

galaxy xr8 · 12-12-2020, 11:07 PM

Hi GT,

Are the rear bleed screw in the brake calliper's still available for AUII XR8 standard PBR brakes.

Also the rear exhaust rubber hanger ?, although I have a Herrod exhaust on it now but not sure if they used the genuine rubber mount or not ?.

Cheers.

GTLEGEND · 12-12-2020, 11:22 PM

Quote:

Originally Posted by galaxy xr8

Hi GT,

Are the rear bleed screw in the brake calliper's still available for AUII XR8 standard PBR brakes.

Also the rear exhaust rubber hanger ?, although I have a Herrod exhaust on it now but not sure if they used the genuine rubber mount or not ?.

Cheers.

Hi Galaxy XR8,

Brake bleed screw is not available from Ford, how ever I am sure they are available from aftermarket brake specialists or auto stores.

Yes rear rubber hanger for AU2 XR8 is still available, $10 + freight each.

Cheers,
GT

galaxy xr8 · 12-12-2020, 11:29 PM

Quote:

Originally Posted by GTLEGEND

Hi Galaxy XR8,

Brake bleed screw is not available from Ford, how ever I am sure they are available from aftermarket brake specialists or auto stores.

Yes rear rubber hanger for AU2 XR8 is still available, $10 + freight each.

Cheers,
GT

Cheers, mate, does the rear rubber hanger have a part number on it or pic, I'm trying to establish if the one I have that is stuffed is a genuine one or not, I assume even though Herrod did the exhaust that it would have been designed around all the original hangers etc, and therefore theoretically should use the existing rubber mount.

GTLEGEND · 12-12-2020, 11:44 PM

Quote:

Originally Posted by galaxy xr8

Cheers, mate, does the rear rubber hanger have a part number on it or pic, I'm trying to establish if the one I have that is stuffed is a genuine one or not, I assume even though Herrod did the exhaust that it would have been designed around all the original hangers etc, and therefore theoretically should use the existing rubber mount.

Not sure about a part number on it, but they do have the Ford symbol on it..

Exhaust Hanger.JPG

Dingo · 17-12-2020, 08:50 PM

Quote:

Originally Posted by galaxy xr8

Cheers, mate, does the rear rubber hanger have a part number on it or pic, I'm trying to establish if the one I have that is stuffed is a genuine one or not, I assume even though Herrod did the exhaust that it would have been designed around all the original hangers etc, and therefore theoretically should use the existing rubber mount.

Quote:

Originally Posted by GTLEGEND

Not sure about a part number on it, but they do have the Ford symbol on it..

Attachment 103847

Yes they had a Engineering number on them - when these were Brand New they started life as EA-5F262-A these had a 86DA-5F262-AA engineering number on them also with a Ford Oval these were then replaced by the current Part Number BAFC-5F262-D which no longer has the Engineering number on them only the Ford Oval as you can see from GT's photo

galaxy xr8 · 12-12-2020, 11:46 PM

Also,I know you said it's no longer available but is this the part number for the bleed screw ?, I come across it via Dr google.
EA2208A

GTLEGEND · 13-12-2020, 12:35 AM

Quote:

Originally Posted by galaxy xr8

Also,I know you said it's no longer available but is this the part number for the bleed screw ?, I come across it via Dr google.
EA2208A

For AU the part number of the bleed screw is ER 2A125 A.

Interesting that the part number you mention is still available but it suits EA all the way to FGX and SX-SZ Territory, but it skips AU AU2 AU3. $15 + freight each.

It may still fit an AU?

galaxy xr8 · 13-12-2020, 12:37 AM

Quote:

Originally Posted by GTLEGEND

For AU the part number of the bleed screw is ER 2A125 A.

Interesting that the part number you mention is still available but it suits EA all the way to FGX and SX-SZ Territory, but it skips AU AU2 AU3. $15 + freight each.

It may still fit an AU?

Yeah thats what I found too, it fits every model virtually but AU, hmmm how to find out if it fits properly ?.

GTLEGEND · 13-12-2020, 12:40 AM

Quote:

Originally Posted by galaxy xr8

Yeah thats what I found too, it fits every model virtually but AU, hmmm how to find out if it fits properly ?.

Buy one and see or get a second hand one from the wreckers and compare, its the only way you will confirm for sure.

PHANTMXR6 · 13-12-2020, 09:13 PM

Can I have a price on a genuine FG XR steering wheel please?
Wheel only.

Thanks in advance.

Slash · 16-12-2020, 08:52 PM

If still available, bf2 Falcon XR6 passenger front door trim spear in silver.
Thanks

GTLEGEND · 16-12-2020, 10:44 PM

Quote:

Originally Posted by Slash

If still available, bf2 Falcon XR6 passenger front door trim spear in silver.
Thanks

As you can see by the image below, the spear was never sold separately unless you are referring to the silver part that sits on the outer door pull handle/armrest (ID by part 24184)?

BA Door Trim.JPG

Slash · 17-12-2020, 01:21 PM

Quote:

Originally Posted by GTLEGEND

As you can see by the image below, the spear was never sold separately unless you are referring to the silver part that sits on the outer door pull handle/armrest (ID by part 24184)?

Attachment 103860

Yes that's what i am after. The armrest insert.

GTLEGEND · 17-12-2020, 02:34 PM

Quote:

Originally Posted by Slash

Yes that's what i am after. The armrest insert.

Hi Slash,

I am sure I can source one of those new. Just waiting on confirmation and price. Will et you know asap.

GT

GTLEGEND · 18-12-2020, 10:26 AM

Quote:

Originally Posted by Slash

Yes that's what i am after. The armrest insert.

Confirmed can get you a NOS RHF armrest silver insert for vehicle built after 1/10/2005.

$80 + freight.

If you want one, PM me and we can sort it out.

Slash · 19-12-2020, 11:28 AM

Quote:

Originally Posted by GTLEGEND

Confirmed can get you a NOS RHF armrest silver insert for vehicle built after 1/10/2005.

$80 + freight.

If you want one, PM me and we can sort it out.

I was after LHF passenger door sorry. I have build 10/2006 xr6t so all good there.

**FairmontGS** · 18-12-2020, 07:46 PM

GT, a question - does Ford supply the perforated grey leather for the inserts on the seat bases or is it complete covers only? I have a 1" slash in the rear squab base from a friend who fitted a baby seat without a blanket underneath.

Also, is the drivers' base seat foam still available?

Many thanks.

GTLEGEND · 18-12-2020, 08:12 PM

Quote:

Originally Posted by FairmontGS

GT, a question - does Ford supply the perforated grey leather for the inserts on the seat bases or is it complete covers only? I have a 1" slash in the rear squab base from a friend who fitted a baby seat without a blanket underneath.

Also, is the drivers' base seat foam still available?

Many thanks.

Complete seat covers only, no sections as such. Rear seat base trim cover is $730 + freight.

Yes Drivers seat base cushion is still available @ $230 + freight.

Bossxr8 · 21-12-2020, 02:03 PM

Do Ford still stock FG XR8 bonnets ie FG and FGII?

GTLEGEND · 21-12-2020, 03:10 PM

Quote:

Originally Posted by Bossxr8

Do Ford still stock FG XR8 bonnets ie FG and FGII?

Yes, but around $2200 each..