|
|
|
|
|
|
|||||||
| View Poll Results: 2 L OHC Firing order | |||
| 1342 |
   
|
4 | 66.67% |
| 1432 |
  
|
0 | 0% |
| 1243 |
  
|
1 | 16.67% |
| 1423 |
  
|
1 | 16.67% |
| Voters: 6. You may not vote on this poll | |||
 |
|
|
Thread Tools | Display Modes |
04-04-2006, 08:49 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2006
Posts: 3
|
I have just done the head up on a 2 litre motor. ( to get a miss that was in there). No 2 Ex was bent badly. Bought a new valve, lapped them all in.
Still shake rattle & roll. Havn't got a manual and was trying to recall if this was the motor in the back of my mind with an unusual firing order ( not 1342) Just done it, have not changed plugs or done compression test yet. I set the clearances @ 10 & 12 thou. but it misses straight away so shouldn't be this. The proper clearances would be nice too. Last edited by Smooth Gecko; 04-04-2006 at 09:09 PM. |
||
|
|
|
04-04-2006, 10:53 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: South Australia
Posts: 3,173
|
2.0L pinto had normal 1-3-4-2 firing order... it was the 1100-1600 crossflow's that had the strange 1-2-4-3 firing order.
|
||
|
|
|
|
04-04-2006, 11:30 PM
|
#3 | ||
|
Starter Motor
Join Date: Apr 2006
Posts: 3
|
Good stuff "Perana XR8", had a sneaky feeling it was an older Ford motor.
|
||
|
|
|
|
05-04-2006, 05:12 PM
|
#4 | ||
|
Starter Motor
Join Date: Apr 2006
Posts: 3
|
It was due to a sub-minimum clearance on the tip - ground setting on the non-sparking plug.! lol
( Went straight to it when I knew the order was right!) |
||
|
|
|
2.0 l, Firing Order
Thanks
Linear Mode
