Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 01-06-2011, 06:41 PM   #1
BlueBloodAU
Just keeps gettin' better
 
BlueBloodAU's Avatar
 
Join Date: Sep 2010
Location: WA
Posts: 42
Default AU won't start after replacing fuel filter

Hi everyone,

I don't usually ask for advice here as a search usually turns up an answer, however, I couldn't find one today, so here goes..

Basically, I've just replaced the fuel filter myself on my AU1 sedan for the first time and having followed the instructions in my Haynes manual, I finished putting the new fuel filter in and then went to start the car, but it wouldn't start! I looked underneath the car and found fuel dripping from where the filter is after some gushed out, so went back under and re-tightened it with a ring spanner and thought this might fix it, but low and behold the car still won't start, it just makes a ticking sound when I try to start the car..does anyone know how to fix this or what the problem might be?

Thanks in advance

__________________
The greatest pleasure in life is doing what people say you cannot do.
BlueBloodAU is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 06:47 PM   #2
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,283
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default Re: AU won't start after replacing fuel filter

From what I have been told, you are suppose to remove the fuel pump fuse prior to removing the old filter, start the car and let it run the fuel lines dry until it stalls and doesnt start anymore, THEN replace the old filter with the new, after that, replacing the fuse, and then priming the fuel pump a few times prior to restarting it. I think that's supposed to be how to do it according to my mechanic.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 06:51 PM   #3
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default Re: AU won't start after replacing fuel filter

if it is just making a ticking sound it sounds like the starter isn't kicking in. try wiggling the gear shifter in park or try it in neutral, if still no go try wiggling the battery terminals, may be a loose connection.

if still no joy it sounds like your battery is flat, you'll either need to get a jump start or charge the battery up with a charger.
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 06:52 PM   #4
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: AU won't start after replacing fuel filter

if it is just clicking but not turning over sounds like you have flattened the battery
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 06:52 PM   #5
BlueBloodAU
Just keeps gettin' better
 
BlueBloodAU's Avatar
 
Join Date: Sep 2010
Location: WA
Posts: 42
Default Re: AU won't start after replacing fuel filter

Hi Shav,

Yeah I did all of that as it's in the Haynes manual, but what is 'priming'?

I'm beginning the think the battery may be the problem to be honest. Will have to check that as well..
__________________
The greatest pleasure in life is doing what people say you cannot do.
BlueBloodAU is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 06:54 PM   #6
BlueBloodAU
Just keeps gettin' better
 
BlueBloodAU's Avatar
 
Join Date: Sep 2010
Location: WA
Posts: 42
Default Re: AU won't start after replacing fuel filter

Thanks guys,

I'm waiting for the old man to bring his battery jumper/charger around, I will report back after we give that a go..
__________________
The greatest pleasure in life is doing what people say you cannot do.
BlueBloodAU is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 06:55 PM   #7
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,283
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default Re: AU won't start after replacing fuel filter

Quote:
Originally Posted by BlueBloodAU
Hi Shav,

Yeah I did all of that as it's in the Haynes manual, but what is 'priming'?

I'm beginning the think the battery may be the problem to be honest. Will have to check that as well..
priming it just turning the ignition to accessories so you can hear the fuel pump make a buzzing noise for a few seconds. If this is still happening ok, then you may have run the battery flat. Did you have your radio on or leave the keys in the ignition while on when you did the filter?
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 07:06 PM   #8
BlueBloodAU
Just keeps gettin' better
 
BlueBloodAU's Avatar
 
Join Date: Sep 2010
Location: WA
Posts: 42
Default Re: AU won't start after replacing fuel filter

Quote:
Originally Posted by blueoval
priming it just turning the ignition to accessories so you can hear the fuel pump make a buzzing noise for a few seconds. If this is still happening ok, then you may have run the battery flat. Did you have your radio on or leave the keys in the ignition while on when you did the filter?
I know what you mean. I'm pretty certain the fuel pump is working fine, as I found a bit of fuel under the car the first time I tried to start it before I tightened the connection on the filter again.

No, I left the keys out of the ignition all together, but I had the radio on yesterday while I was doing something, so that could well explain the problem! But the battery is four years old, so it may be on it's way out.
__________________
The greatest pleasure in life is doing what people say you cannot do.
BlueBloodAU is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 07:19 PM   #9
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,283
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default Re: AU won't start after replacing fuel filter

4 years is definitely getting on for a battery. Check the level of the battery fluid first incase its that. If its topped up, then my guess is, its due for replacement.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 08:26 PM   #10
AUIIPURSUIT
pursuit ute baby
 
AUIIPURSUIT's Avatar
 
Join Date: Jun 2010
Posts: 864
Default Re: AU won't start after replacing fuel filter

if its not dry starting, aka "ARRRARRRRARRRRARRRR" and its going "tickticktick". its sparks not fuel.

Soon as i saw the thread title, i thought, fuse not replaced.. one other thing to consider, and this is a long shot, but town on the passenger side under your engine, is a coil which has your main active off your battery running to it (if you have trouble locating it). This has a small, 2.5mm cable with a clip on it that is obviously a control cable. Its quite easy to knock off if youre under your car (this happened to me changing leads) and the car will not start without it.

Im not 100% if its referred to a coil, but its worth a shot and i hope you know what i mean.
__________________
my ride : AU xr8 pursuit ute
AUIIPURSUIT is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2011, 09:04 PM   #11
BlueBloodAU
Just keeps gettin' better
 
BlueBloodAU's Avatar
 
Join Date: Sep 2010
Location: WA
Posts: 42
Default Re: AU won't start after replacing fuel filter

Well..turns out it was just the battery! It's not the first time I've run it down, happened a few months back, but having just changed the fuel filter, I was concerned it had something to do with the fuel system. Because of the batterys age, it's probably only a matter of time before it gives in.

Thanks everyone for responding so quickly, I will take the advice you guys have given me and keep it in mind for the next time the car doesn't wanna start.. *touch wood* it's not for a long while haha.
__________________
The greatest pleasure in life is doing what people say you cannot do.
BlueBloodAU is offline   Reply With Quote Multi-Quote with this Post
Old 02-06-2011, 01:34 PM   #12
Day-mow
rexnet
 
Day-mow's Avatar
 
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,559
Default Re: AU won't start after replacing fuel filter

Just make sure it's not leaking. Ive replaced mine before (also never worried about taking out the fuse and all of that just wore saftey glasses) and it's taken me a few tries before it stops leaking. Tightening it may cause some damage. Hopefully it's gone back on all good.
Glad to hear it fixed
__________________
MY06 WRX Build Not Bought
Collingrove Hill Climb- 38.79

Remember it is the internet,So beware of trolls, If you argue with trolls the kids will laugh at you

Follow me on twitter @ Day_mow
Day-mow is offline   Reply With Quote Multi-Quote with this Post
Old 02-06-2011, 01:39 PM   #13
4ford
Regular Member
 
Join Date: Oct 2008
Location: Burpengary, Q
Posts: 112
Smile Re: AU won't start after replacing fuel filter

Hey...BlueOval...correct me (please) if I'm wrong here, but I'm under the impression that the fuel pump will not run until you select IGN on with the key.
That is, all the dash warning lights are illuminated.
Otherwise, your fuel pump would be running all the time the car is parked with the radio on...doesn't seem right!!

Cheers
4ford is offline   Reply With Quote Multi-Quote with this Post
Old 02-06-2011, 01:56 PM   #14
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,283
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default Re: AU won't start after replacing fuel filter

Quote:
Originally Posted by 4ford
Hey...BlueOval...correct me (please) if I'm wrong here, but I'm under the impression that the fuel pump will not run until you select IGN on with the key.
That is, all the dash warning lights are illuminated.
Otherwise, your fuel pump would be running all the time the car is parked with the radio on...doesn't seem right!!

Cheers
You are correct mate. Sorry, I just poorly explained what I meant.

I often get the 2 mixed up.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 02-06-2011, 02:05 PM   #15
Beer Baron
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
Default Re: AU won't start after replacing fuel filter

The fuel pump only primes with the IGN on engine off, Then it runs all the time when the engine cranks and starts.
__________________
AU XLS.
Beer Baron is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:53 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL