Genuine Ford Parts - Page 45

**FoxtrotGolfXray 5.0** · 22-03-2023, 11:19 AM

Quote:

Originally Posted by GTLEGEND

Last I heard they were waiting on another batch to come in, but not sure how that is going. Would have to chase to see if I can find out any further information. Does anyone actually really need one right now because of failure? I don't think I have heard of FG2 or FGX having the same issue as the earlier vehicles of the cooler causing a milkshake. I believe that concern was fixed by FG2.

Jastel had his FG X XR6 milkshake, as per that thread aussie linked to. And at only 80000km, too.

Would be interesting to understand the failure mode as it is the first I've heard of an FG X having that issue.

**mchaggis** · 27-03-2023, 10:09 PM

Quote:

Originally Posted by GTLEGEND

All good.

So LHF door latch is available no problem, $210. Pending on vehicle you may also need the wiring jumper loom as Ford changed the wiring connector on vehicles on 7/2002-2/2006 to the later style for parts. In other words vehicles built in that periord had a early style connector, for servicability the parts have a connector that was fitted to cars after this date and so to fit the later part to the earlier cars you need a jumper loom. Still available at $23.

LH door B pillar trim is obsolete, but I may be able to source you one. Need to check and confirm and get back to you. Let me know if you would like me to chase.

Quote:

Originally Posted by mchaggis

It's a July 2005 build, so I guess we need to include the loom. Take the time you need to source a B-Pillar trim and we can complete this in one go hopefully.

Thanks for your attention to detail!

Hi GTLegend, any progress on the b pillar trim? If not I'll just take the latch and loom.

GTLEGEND · 27-03-2023, 10:19 PM

Quote:

Originally Posted by mchaggis

Hi GTLegend, any progress on the b pillar trim? If not I'll just take the latch and loom.

Hi mate,

Yes I organised to get it last week. I am hoping to have it by end of this week. Was waiting till I had it in my hand before I replied back to you.

GT

jwm1944 · 29-03-2023, 09:45 AM

G'day, need a front left cornering lamp for NL Fairlane 1997 V8.Any help appreciated.Thanks,John M.

GTLEGEND · 29-03-2023, 09:37 PM

Quote:

Originally Posted by jwm1944

G'day, need a front left cornering lamp for NL Fairlane 1997 V8.Any help appreciated.Thanks,John M.

Could not find a LH only, either RH or pair:

https://www.ebay.com.au/itm/27570348...Bk9SR972ycvlYQ

GTLEGEND · 29-03-2023, 09:51 PM

For XW Coyote

BF Engine Bay.jpg

Scruba · 01-04-2023, 12:44 PM

Hi. I've got a 2000 AUII Fairmont GHIA VCT 6 Cyl.

Chasing a Power Steering Pump and the O'ring/Gasket that sits behind the VCT solenoid assy (bolts up to the front of the engine not the solenoid itself)

Thanks

GTLEGEND · 01-04-2023, 08:17 PM

Quote:

Originally Posted by Scruba

Hi. I've got a 2000 AUII Fairmont GHIA VCT 6 Cyl.

Chasing a Power Steering Pump and the O'ring/Gasket that sits behind the VCT solenoid assy (bolts up to the front of the engine not the solenoid itself)

Thanks

Genuine pumps are obsolete, but plenty of aftermarket ones around like this example.

https://www.ebay.com.au/itm/11476984...3ABFBMooqCvudh

As for the O ring the large one is V890155S100 and the small one in the middle is ERT6C262A are also both obsolete, but if you take your old ones to a seal place like CBC bearings, I am sure they can match one up.

Hope that helps.

Scruba · 04-04-2023, 06:38 AM

Quote:

Originally Posted by GTLEGEND

Genuine pumps are obsolete, but plenty of aftermarket ones around like this example.

https://www.ebay.com.au/itm/11476984...3ABFBMooqCvudh

As for the O ring the large one is V890155S100 and the small one in the middle is ERT6C262A are also both obsolete, but if you take your old ones to a seal place like CBC bearings, I am sure they can match one up.

Hope that helps.

Thank you so much. Absolutely appreciated.

GTLEGEND · 04-04-2023, 07:56 AM

Quote:

Originally Posted by mchaggis

It's a July 2005 build, so I guess we need to include the loom. Take the time you need to source a B-Pillar trim and we can complete this in one go hopefully.

Thanks for your attention to detail!

So I chased up the trim yesterday only found out that they did not send because they lost my details. Lucky I rang. They will send out today.

Sorry mate, not my doing this time lol..

**BFIIGhiaZF6** · 06-04-2023, 07:32 PM

Hi GT, am looking for a pair of new OEM black headlights and clear protectors for my 2007 BFII Ghia.

Thanks, George

GTLEGEND · 06-04-2023, 09:59 PM

Quote:

Originally Posted by BFIIGhiaZF6

Hi GT, am looking for a pair of new OEM black headlights and clear protectors for my 2007 BFII Ghia.

Thanks, George

Hi George,

I think I could only source the alternate Motorcraft units of head lights. Let me know if you want me to chase.

I may be able to get my hands on genuine Headlight covers, but would need to check and confirm. Leave this with me till after Easter.

GT

**aussiblue** · 07-04-2023, 12:05 AM

Are Sat Nav owners guides/booklets for the MKII FG still available?

GTLEGEND · 07-04-2023, 07:12 AM

Quote:

Originally Posted by aussiblue

Are Sat Nav owners guides/booklets for the MKII FG still available?

I can get them for around $20 NOS..

**aussiblue** · 07-04-2023, 11:44 AM

Quote:

I can get them for around $20 NOS..

OK; I'll have two then please.

bondy99 · 07-04-2023, 05:53 PM

GT,

I'm chasing two original battery terminal clamps for the AU2 as well as the specialised clamp nuts. One of mine has almost rounded out. They use a 10mm ring socket to secure to battery pole.

Are they still obtainable?

https://i.postimg.cc/GTj95Hqx/Terminal-clamp-nut.jpg[/img][/url]

bondy99 · 07-04-2023, 05:55 PM

https://i.postimg.cc/GTj95Hqx/Terminal-clamp-nut.jpg[/img][/url]

GTLEGEND · 07-04-2023, 09:18 PM

Quote:

Originally Posted by aussiblue

OK; I'll have two then please.

No worries, please send me a PM to arrange payment etc..

GTLEGEND · 07-04-2023, 09:54 PM

Quote:

Originally Posted by bondy99

GT,

I'm chasing two original battery terminal clamps for the AU2 as well as the specialised clamp nuts. One of mine has almost rounded out. They use a 10mm ring socket to secure to battery pole.

Are they still obtainable?

https://i.postimg.cc/GTj95Hqx/Terminal-clamp-nut.jpg]image[/URL][/url]

Battery terminals were never sold separate, only part of the positive and negative leads.

Long gone unfortunately.

bondy99 · 08-04-2023, 09:22 AM

Quote:

Originally Posted by GTLEGEND

Battery terminals were never sold separate, only part of the positive and negative leads.

Long gone unfortunately.

Ok. Might have to see if wreckers might have them on vehicle but highly unlikely with my luck.

Cheers.

**aussiblue** · 12-04-2023, 11:42 PM

So re https://fordforums.com.au/showthread.php?t=11497649 are there two or more different heater cores for the various AU series and if so, are the interchangeable?

GTLEGEND · 13-04-2023, 08:25 AM

Quote:

Originally Posted by aussiblue

So re https://fordforums.com.au/showthread.php?t=11497649 are there two or more different heater cores for the various AU series and if so, are the interchangeable?

No only 1 type heater core for all AU's ER19D710Z.

**BFIIGhiaZF6** · 13-04-2023, 06:41 PM

Quote:

Originally Posted by GTLEGEND

Hi George,

I think I could only source the alternate Motorcraft units of head lights. Let me know if you want me to chase.

I may be able to get my hands on genuine Headlight covers, but would need to check and confirm. Leave this with me till after Easter.

GT

Hi GT, Picked up a pair of after market TYC black BFII headlights, OEM appear to be unobtainable.

https://www.fordforums.com.au/vbport...postcount=4416

Have also ordered some after market headlight protectors,

https://www.ebay.com.au/itm/152613417623

but would still prefer to have the Ford ones if you can find some for me.

GTLEGEND · 13-04-2023, 07:51 PM

Quote:

Originally Posted by BFIIGhiaZF6

Hi GT, Picked up a pair of after market TYC black BFII headlights, OEM appear to be unobtainable.

https://www.fordforums.com.au/vbport...postcount=4416

Have also ordered some after market headlight protectors,

https://www.ebay.com.au/itm/152613417623

but would still prefer to have the Ford ones if you can find some for me.

Let me chase them and get back to you..

GTLEGEND · 14-04-2023, 09:00 AM

Quote:

Originally Posted by BFIIGhiaZF6

Hi GT, Picked up a pair of after market TYC black BFII headlights, OEM appear to be unobtainable.

https://www.fordforums.com.au/vbport...postcount=4416

Have also ordered some after market headlight protectors,

https://www.ebay.com.au/itm/152613417623

but would still prefer to have the Ford ones if you can find some for me.

Hey mate,

I have found a set of genuine NOS headlight protectors. PM me for details.

GT

**BFIIGhiaZF6** · 14-04-2023, 09:46 AM

Quote:

Originally Posted by GTLEGEND

Hey mate,

I have found a set of genuine NOS headlight protectors. PM me for details.

GT

Great, thanks GT

, PM sent.

Citroënbender · 17-04-2023, 06:46 AM

Good morning!

On Territory control blades, there are four (total per car) Christmas tree clips that are integrated with a cable tie. These hold the ABS sensor cables steady/safe.

Are these clips still available? I can leave cash in the mailbox if you’re passing by one day soon.

GTLEGEND · 17-04-2023, 09:38 AM

Quote:

Originally Posted by Citroënbender

Good morning!

On Territory control blades, there are four (total per car) Christmas tree clips that are integrated with a cable tie. These hold the ABS sensor cables steady/safe.

Are these clips still available? I can leave cash in the mailbox if you’re passing by one day soon.

Hey mate,

As per image below, it looks like they were never sold seperate and only part of the ABS sensor/wiring only. I may have something similar that is black in colour, but would need to dig them out.

Let me know and I will try and find them if need be.

SX SY Territory Rear ABS Sensor.png

Citroënbender · 17-04-2023, 09:53 AM

Thanks for a quick reply.

That’s a nuisance about supply only as a cable unit. I’ll try KR Partners and one of the eBay sellers who has a clue on OEM stuff.

Vicusj · 17-04-2023, 07:59 PM

Hi GT, how are you doing?
Chasing hens teeth here I know - the wife’s trusty 09SY is slowly falling apart, and needs a new tailgate garnish, the one on the glass with the Ford logo on. I tried to fix the broken tabs with plastic glue, but the whole thing is so brittle and I cracked it almost in half. I tried wreckers all over but seems to be the 1st thing that goes.

I’m led to believe the SY11 and SZ garnish will also fit, so im not fussed to get one if that was the case.