![]() |
|
|
Shockworks Ford damper specialist located in Melbourne's S.E suburbs. Website Link |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | |||
Regular Member
Join Date: Jan 2013
Posts: 304
|
Quote:
Natedog may be some help with the info he has just supplied, and we will have to wait until we get the brakes back to confirm for you. Can you give us the ID of the rim so we can do a clearance check? We will try and get them back soon but may be a little bit of a challenge as the test driver (natedog) seems to be having too much fun!! Cheers |
|||
![]() |
![]() ![]() |
![]() |
#2 | |||
Regular Member
Join Date: Sep 2011
Posts: 285
|
Quote:
If you can measure the distance from the centre of your wheel to the inner circumference of the wheel as accurately as possible I can do the same and it might help? Or I can drive up to Sydney to show them to you....is that cool Brett?? ![]()
__________________
2010 mk1 GS sedan with 412rwkw thanks to Pitlane Performance! KPM Street fighter stage 2 intercooler with 70mm pulley 1000cc injectors Herrod Fuel pump BMC air filter Built tailshaft Shockworks Coilovers Shockworks 4 piston monobloc front brake kit Herrod oil breather and "special" diff breather kit 19x9.5 rears 19x8.5 fronts with sticky Michelin rubber ![]() Last edited by natedog; 06-03-2014 at 03:51 PM. |
|||
![]() |
![]() ![]() |
2 users like this post: |
![]() |
#3 | ||
Regular Member
Join Date: Jan 2013
Posts: 304
|
We will now be getting a supply of Goodridge braided brake lines from Howard Reynold's Race Brakes which are ADR approved for our Ford brake upgrades. Howard has so many years of experience. He even supported me in the early 90's when I was tearing up the tracks around Victoria!!
![]() |
||
![]() |
![]() ![]() |