|
17-07-2011, 08:55 PM | #12 | ||
FF.Com.Au Hardcore
Join Date: Mar 2010
Posts: 1,481
|
you can fit the towbar yourself if your a bit handy.
Its fairly simple. All you do is remove the rear bar, then you will see a slam pannel that is bolted to the chassis rail. remove this and the towbar slides into the chassis rails & replaces this part. There are holes already in the chassis rails that allow you to bolt it straight on. Then just replace the rear bar & then do the wiring. I think with the LV it just plugs into the loom which you access by removing the trim inside the boot. Just be sure you get the LV towbar as there are differences between the LS & LV |
||