Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Closed Thread
 
Thread Tools Display Modes
Old 17-03-2013, 09:50 PM   #31
2011G6E
FF.Com.Au Hardcore
 
2011G6E's Avatar
 
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

250? Nope.
That bike almost looks rideable. Your shock at what happened and the bike being so damn close to you would have seemed like it "flew" past you.

The main reason is he was up and moving and not spread all over the road...I've unfortunately seen the results of an impact of a head on with a bike (BMW R series tourer) with a car at 110 (car was doing 100 coming the other way) and the biggest part of the bike left was the main part of the engine and the shattered wheels. The rider and pillion (two people from our bike club) weren't pretty, and they had full leathers and full face helmets.
2011G6E is offline  
This user likes this post:
Old 17-03-2013, 10:03 PM   #32
stazza
FF.Com.Au Hardcore
 
stazza's Avatar
 
Join Date: Nov 2008
Posts: 1,422
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Not sure why you guys are so hung up on why the bike isnt completely destroyed. It wasnt a direct collision. As I stated it hit the other car which is quite low, most likely got some deflection and maybe a little airborne (witnesses said this) and simply sideswiped my car and continued down the road and fell over in the dirt a few hundred metres up the road on the other side. Im not hugely surprised there isnt massive damage to the bike.

We all know freak accidents occur, and not everyone dies the way they "should" given the statistics. Just look up russian dash cam videos to see some spectacular crashes that people walk away from.

The incredible amount of know-it-alls on here is almost a complete deterrent to post on here at all.

And not that it is ANYONES business on here, my brother and his partner died on the road a couple years ago, so justifiably I am particularly angered at people who endager others lives like this guy did. There's simply no need to ride the way this guy did in such traffic conditions.
__________________
2011 SILHOUETTE FPV GS 315 #0275
20x10", 20x8.5" Lenso D1R's
Pedders XA Coilovers
Brembo 4/1
Pacemaker 1" 7/8 Headers
Twin 3" Stainless Manta Catback
XFT Built Motor
XFT Custom Surge Tank
XFT Stage 3 ZF
Final Drive Chromoly Tailshaft
KPM Twin Air Filter
KPM Stage 2 Intercooler
KPM Twin Throttle Body
2.6L Kenne Bell on E85
BlueStreak Circle D Converter
900+ rwhp thanks to Xtreme Ford Tuning
stazza is offline  
3 users like this post:
Old 17-03-2013, 10:04 PM   #33
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,838
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Why are you not posting pictures of your car?
gcg2503 is offline  
Old 17-03-2013, 10:07 PM   #34
stazza
FF.Com.Au Hardcore
 
stazza's Avatar
 
Join Date: Nov 2008
Posts: 1,422
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

My car is at a friends place at the moment, im out of town. I only took pics of the bike and other car for insurance purposes. Photos of my car can be taken by an assessor.
__________________
2011 SILHOUETTE FPV GS 315 #0275
20x10", 20x8.5" Lenso D1R's
Pedders XA Coilovers
Brembo 4/1
Pacemaker 1" 7/8 Headers
Twin 3" Stainless Manta Catback
XFT Built Motor
XFT Custom Surge Tank
XFT Stage 3 ZF
Final Drive Chromoly Tailshaft
KPM Twin Air Filter
KPM Stage 2 Intercooler
KPM Twin Throttle Body
2.6L Kenne Bell on E85
BlueStreak Circle D Converter
900+ rwhp thanks to Xtreme Ford Tuning
stazza is offline  
Old 17-03-2013, 10:09 PM   #35
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,838
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

OK. That makes sense.
gcg2503 is offline  
Old 17-03-2013, 10:20 PM   #36
stazza
FF.Com.Au Hardcore
 
stazza's Avatar
 
Join Date: Nov 2008
Posts: 1,422
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Who knows, I could post a pic of my car and it'd no doubt be picked apart on here and told how the damages to it aren't consistent with the damage on the bike and the nature of the collision, and that it simply doesn't add up and im in shock and the dents actually don't exist.
__________________
2011 SILHOUETTE FPV GS 315 #0275
20x10", 20x8.5" Lenso D1R's
Pedders XA Coilovers
Brembo 4/1
Pacemaker 1" 7/8 Headers
Twin 3" Stainless Manta Catback
XFT Built Motor
XFT Custom Surge Tank
XFT Stage 3 ZF
Final Drive Chromoly Tailshaft
KPM Twin Air Filter
KPM Stage 2 Intercooler
KPM Twin Throttle Body
2.6L Kenne Bell on E85
BlueStreak Circle D Converter
900+ rwhp thanks to Xtreme Ford Tuning
stazza is offline  
Old 17-03-2013, 11:54 PM   #37
blueprinted_xr
FPV F6E FG XR8 UTE EL XR6
 
blueprinted_xr's Avatar
 
Join Date: May 2006
Location: Perth
Posts: 664
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

lol everyones a critic :P Its accidents like this that I have front and rear cameras fitted to the GT. Thankfully i havent had to turn to the footage for an accident.
blueprinted_xr is offline  
Old 18-03-2013, 12:18 AM   #38
UberKnee
The One Who Knocks
 
UberKnee's Avatar
 
Join Date: Feb 2012
Location: Kalgoorlie
Posts: 1,196
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Quote:
Originally Posted by stazza View Post
Wow. Have you considered taking on a job as a crash investigator?

No need for them to even investigate, just give you a few details and you'll tell them exactly how it played out.

Dude, what would you know? Serious, What the **** would you know?

If I have my cruise control set to 100km/h and a bike has a collision with another car and THEN sideswipes my car and it continues down the road at a speed FAR greater than mine, then one can only come to the conclusion that the bike was travelling at a very high speed.

But hey what would I know? Maybe we were all travelling at 20km/h and he hit us at 40km/h. You tell me, genius.

As for the rest of your reply, if you're not interested in this thread, then get out tough guy.
Don't think he was being a 'toughguy' just that at 250kph on a bike you'd be dead and the bike would be a wreck. If everyone was just doing 100kph (since when does that happen, not saying you were speeding but since when does everyone but one lone bike rider do the speed limit on a freeway?) then he could have even just been doing 120-130 and easily zooming through traffic.

And its not like people are denying the story or denying the crash just that Joe Publics 'expert' guesstimate that he was doing 250, crashed and just got up walking around is ridiculous.
UberKnee is offline  
4 users like this post:
Old 18-03-2013, 01:10 AM   #39
stazza
FF.Com.Au Hardcore
 
stazza's Avatar
 
Join Date: Nov 2008
Posts: 1,422
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

I'm sory but how are you any more of an "expert" than the witnesses that actually witnessed it?

And I never said he got up and simply waltzed around without a care in the world. Yes he got up after a minute or so, screaming, bleeding and skin hanging everywhere, fingernails hanging off and slowly limping to the side of the road. He may have had any number of internal injuries. It just appeared not to be what I would deem life threatening at the time, as he did get up, no doubt pumping with adrenaline. But hey, im no medical expert, perhaps someone on here can telle the exact injuries he would have sustained?

I have a good friend who was once riding his motorcross bike offroad, flat tack 5th gear powerband (about 120ish km/h), hit a massive wooden power pole head on, the forks broke free of the top triple clamp, went flying up the road and he landed on the forks and the pin that goes theough the headstock impaled his right side of his chest. He had a broken pelvis and broken fingers and cracked ribs. He was conscious the whole time, and hes fine.

This rider yesterday collided with cars going the same direction, hardly a head on impact with a stationary object.
__________________
2011 SILHOUETTE FPV GS 315 #0275
20x10", 20x8.5" Lenso D1R's
Pedders XA Coilovers
Brembo 4/1
Pacemaker 1" 7/8 Headers
Twin 3" Stainless Manta Catback
XFT Built Motor
XFT Custom Surge Tank
XFT Stage 3 ZF
Final Drive Chromoly Tailshaft
KPM Twin Air Filter
KPM Stage 2 Intercooler
KPM Twin Throttle Body
2.6L Kenne Bell on E85
BlueStreak Circle D Converter
900+ rwhp thanks to Xtreme Ford Tuning
stazza is offline  
Old 18-03-2013, 01:29 AM   #40
UberKnee
The One Who Knocks
 
UberKnee's Avatar
 
Join Date: Feb 2012
Location: Kalgoorlie
Posts: 1,196
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Yes but 250kph...people would have just seen him going faster than everyone else and had a rough guess. Formula 1 Cars do an average speed of around 250-270 kph on most tracks, to say someone wearing a t shirt and shorts was doing that speed and didn't go splat... 140-150 lets you fly by cars doing 100kph.
UberKnee is offline  
This user likes this post:
Old 18-03-2013, 01:42 AM   #41
comagutsa
Pethy FG XR8 Ute
 
comagutsa's Avatar
 
Join Date: Apr 2011
Location: Perth N.O.R
Posts: 2,966
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

a 250km/h crash would cause more damage than that to the bike ...the engine case would of worn through for a start
still not good what happened ..i will ask a few mates and check out a few of the bike forums i'm on to see if anyone knows who it is etc

sorry to hear mate
__________________
FG XR8 Ute 2010 Nitro,
Mods so far: Herrod CAI, headers, Ballistic cats, Cat back Manta dual 2.5" with X pipe and hotdog mid section, Mellings oil pump, Summit racing 60mm twin throttle body, and Yella Terra plenum
Powerbond 25% under drives, Sports bar,
now fitted with Koya Inox R1's, the rears are 20x10 with a 40mm offset and the fronts are 20x8.5 with a 35mm offset

total of 285.5 rwkw and 642nm
when Herrod cams in 290rwkw

GSXR 750K7 with goodies, dyno'd 136rwhp,
10.567sec for the strip
comagutsa is offline  
Old 18-03-2013, 02:23 AM   #42
comagutsa
Pethy FG XR8 Ute
 
comagutsa's Avatar
 
Join Date: Apr 2011
Location: Perth N.O.R
Posts: 2,966
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

just checked out a few Perth bike forums and nothing about crash on there...but i did put up a post asking if anyone knows about the crash....
this is what i put up ..hope you dont mind

just wondering if anyone's know about this crash
looks like he hit 2 cars and was was in shorts and shirt ..bounced off 1 car from behind and then his bike slid into another car and was moving at speed
hit the back of the kit car 1st




for the speed the bike looks ok but the bloke was ripped to shreds
bike had no number plate

anyone know anything ??


hope this is fine mate ...but id say with no plates on it, it was stollen and by the looks of the tank id say it used to be a black R1 not a maroon one
__________________
FG XR8 Ute 2010 Nitro,
Mods so far: Herrod CAI, headers, Ballistic cats, Cat back Manta dual 2.5" with X pipe and hotdog mid section, Mellings oil pump, Summit racing 60mm twin throttle body, and Yella Terra plenum
Powerbond 25% under drives, Sports bar,
now fitted with Koya Inox R1's, the rears are 20x10 with a 40mm offset and the fronts are 20x8.5 with a 35mm offset

total of 285.5 rwkw and 642nm
when Herrod cams in 290rwkw

GSXR 750K7 with goodies, dyno'd 136rwhp,
10.567sec for the strip
comagutsa is offline  
Old 18-03-2013, 04:17 AM   #43
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

How about all the keyboard experts cut the OP some slack.
He was in an accident that wasn't his fault, things weren't handled well by the police ( they are human and can make mistakes) and he is concerned.
Last think he needs is "experts" giving him a hard time because they obviously know more than those present at the time!!!!

Remember the meaning of expert... X is an unknown quantity and a spurt is a drip under pressure
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline  
This user likes this post:
Old 18-03-2013, 06:47 AM   #44
Danny
GT4.
 
Danny's Avatar
 
Join Date: Dec 2004
Posts: 4,218
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

LOL looks like the Ford Forums Serious Crash Unit has finally arrived. Good one guys, right on cue... Jesus Christ.

Good to hear everyone's not dead, could've been much worse (though I'm no expert like some of you champions, so I can't say that with certainty)
Danny is offline  
Old 18-03-2013, 07:33 AM   #45
LTDHO
The one and only
 
LTDHO's Avatar
 
Join Date: Dec 2004
Location: Carrum Downs, Victoria
Posts: 9,053
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

I don't don't know what WA coppers are like but in Vic they will not provide you with the other parties details to you or your insurer, on a rare occasion it may be on the report which takes months to get. So good luck.

I'm a little harse to riders who don't wear leathers, etc. It's a shame he got up and walked after. I feel sorry for the paramedics after an incident like this.

My advice is to lodge claim to get your car fixed and try and forget the whole thing. Sure your excess will apply but that is something you will have to live with.
__________________
1992 DC LTDHO 360rwkw built by me
Tuned by CVE Performance
Going of the rails on a crazy train
Other cars include Dynamic ED Sprint, Dynamic DL LTD, Sparkling Burgundy DL LTD, Yellow, Red & Blue XB sedan & Black XB Coupe
LTDHO is offline  
Old 18-03-2013, 07:58 AM   #46
XBROO
Obsessed with wheels
 
XBROO's Avatar
 
Join Date: Dec 2006
Posts: 2,298
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

If some of these expert would read 'the bike stayed upright' then ran of the road at a slower speed. So anybody that ride bikes would know that sports bikes like this are very stable at speed. And if it wasn't sliding or tumbling down the road then of coarse there wouldn't be as much damage to the bike. If traffic was cruising around 100kph and the bike hit, that rim of the Lotus that hard to cause that damage, then yeah he was traveling at a fair rate of knots. Maybe not 250kph but would be up around the 200kph mark, so by the time he shat himself and braked before hitting the Lotus he would of washed off a bit of speed. Then the impact a bit more, but still fast enough to go airborne land then hit the OP car. So he might of hit the road around 120kph an hour, but the bike was still upright until it slowed down and went of the road and layed over in the grass.

So why should the bike have anymore damage? And the rider could be a lot worst don't forget adrenaline is a very powerful drug. I come off my CR 500 in top gear after hitting a waterway in a paddock. I was knocked out for a little while, but when I came too I got up, kick my bike over and rode home. When I got home I couldn't put my feet down and just feel off the bike. My mate who lived there and my missus had to carry me to the car. When I was sittting it the car I notice my wrist was broken as it was a weird shape. As we arrived at the hospital my missus had to ask for a wheelchair because I couldn't walk. After they X-rayed me I had cracked my pelvis and hips, I was in traction for quite a while.
XBROO is offline  
This user likes this post:
Old 18-03-2013, 10:07 AM   #47
Full Noise
Life begins at 40
Donating Member1
 
Full Noise's Avatar
 
Join Date: Jan 2005
Location: Melbourne. Socialist capital of Victoriastan.
Posts: 3,715
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Quote:
Originally Posted by LTDHO View Post
I don't don't know what WA coppers are like but in Vic they will not provide you with the other parties details to you or your insurer, on a rare occasion it may be on the report which takes months to get. So good luck.
I hate to disagree with you buddy.
I had some bloke come through a give way sign a few years back and I cleaned him up big time. He and his missus were taken to hospital.
The police at the scene gave me all of his details.

Quote:
Originally Posted by stazza View Post
Witnesses say the rider was flying through traffic at what they estimated to be atleast 250km/h
I always believe 100% what a witness says. Legend says that estimated speeds from witnesses are the most accurate way of detecting the actual speed of any vehicle.
I’m quite surprised that the police don’t ditch their radars and just go by witness accounts of speed, could be a good little earner for state governments. Sarcasm off.

Quote:
Originally Posted by comagutsa View Post
a 250km/h crash would cause more damage than that to the bike ...the engine case would of worn through for a start.
Yep, it looks like it feel off its stand.
__________________
Quote:
Marriage is like a deck of cards. In the beginning you’ll have hearts and diamonds. Towards the end, you’ll be looking for a club and a spade.
Justice is what you get when you run out of money.

Last edited by Full Noise; 18-03-2013 at 10:16 AM. Reason: Added a bit.
Full Noise is offline  
Old 18-03-2013, 11:21 AM   #48
BadMax
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Posts: 1,316
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

So the OP blows his top...nice work.
I don't know how anyone can be the judge of speed when the vehicle is approaching you from behind? So how does the OP know the rider was doing 200+, because of the witnesses', well they aren't experts are they...
We don't know the extent of your damage, like hell you wouldn't have taken photos of your own car, you have taken photos of the other vehicles.. You've probably got them plastered all over FB for your mates to see and support you.
I don't understand why you keep saying it wasn't a 'direct impact', clearly it was for the open wheeler and yours was just on deflection. Smashing the edge off an alloy rim isn't overly difficult, looking at the bike both tyres are inflated, forks even look straight. Clearly not a 200k+ hit.

Considering your reaction in this thread...I can only imagine how much carry on there was at the scene...maybe that's why the cops bailed?
BadMax is offline  
Old 18-03-2013, 11:36 AM   #49
cs123
Donating Member
Donating Member3
 
cs123's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 28,094
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Can't think of anyone more deserving. Russ Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the technical support behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical submission 
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

What's the go guys? Why are we attacking the OP?

He was obviously shocked due to the events. Maybe he miscalculated the speed. Maybe not.

It's certainly a serious crash when a rider hits 2 cars and comes off their bike.

How about we put the pitchforks away for the moment.
__________________
I love Holdens....
cs123 is offline  
Old 18-03-2013, 12:27 PM   #50
comagutsa
Pethy FG XR8 Ute
 
comagutsa's Avatar
 
Join Date: Apr 2011
Location: Perth N.O.R
Posts: 2,966
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

a few people saw the bike parked on the side of the freeway but so far no one knows anything on the bike forums ..sorry mate
__________________
FG XR8 Ute 2010 Nitro,
Mods so far: Herrod CAI, headers, Ballistic cats, Cat back Manta dual 2.5" with X pipe and hotdog mid section, Mellings oil pump, Summit racing 60mm twin throttle body, and Yella Terra plenum
Powerbond 25% under drives, Sports bar,
now fitted with Koya Inox R1's, the rears are 20x10 with a 40mm offset and the fronts are 20x8.5 with a 35mm offset

total of 285.5 rwkw and 642nm
when Herrod cams in 290rwkw

GSXR 750K7 with goodies, dyno'd 136rwhp,
10.567sec for the strip
comagutsa is offline  
This user likes this post:
Old 18-03-2013, 01:08 PM   #51
flappist
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,077
Default Re: Advice Needed - R1 collided with my GS at over 200km/h on Mitchell Fwy today

Ok enough.

The question has been answered.

Closed
flappist is offline  
Closed Thread

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 05:01 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL