![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Starter Motor
Join Date: Aug 2017
Posts: 2
|
Hi All
Hoping someone may be able to tell what rims would fit a 71 Capri, or where i could get one in Sydney, just need it for the spare wheel ? Thanks Mark |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,015
|
So, the standard was a 13x5". Stud pattern is 4 x 4.25" (4 x 108 for metric) and the offset is 19mm (20mm in some markets).
Some markets had a 14x6" option with the same PCD but an offset of 10mm. In terms of wheels that will fit, you've got a fairly large choice but for things that are fairly common in Australia: Cortina TC/TD/TE/TF Escort MkII (early) Ford Ka (early) Mondeo Leyland Marina Cheers Russ
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#3 | ||
Starter Motor
Join Date: May 2017
Posts: 16
|
Is this offset + or - 20mm? I’m looking at moving from 13” to 15” to house a large disk brake setup on front (mk1 Capri). Thank you!
Sent from my iPhone using Tapatalk |
||
![]() |
![]() ![]() |