View Single Post
Old 17-09-2020, 07:16 PM   #5
mad2
Regular...with metamusal
Donating Member2
 
Join Date: Oct 2009
Location: Geeeloong
Posts: 5,843
Default Re: Parking sensor fault

Quote:
Originally Posted by Lecherus View Post
About 2 years ago I backed into a post causing minor damage to the right rear,
Where the sensor mounted in the bumper was just minimally damaged,
However soon as I reversed the beeps went mad,
2011 MC wagon, 2 outer are white and 2 inner not painted, on black sill,
I ordered another sensor from overseas via Ebay,
Swapped all the rears around using new one, still went mad,
I painted the new sensor the white colour like the 2 outside ones, still no good,
Then I loosely hung them out from the bumper socket and all was good,
Fitted them, problems again,
I then fitted one without the rubber seal around it and bingo all good,
Buggered if I know why but its still OK 2 years down the track,
Try with all the sensors hanging out and see how you go,

i tried to fit the factory reverse sensors to my BA wagon .... everything worked well till i clamped/mounted the wiring etc . . maybe that was my problemo
mad2 is online now   Reply With Quote