Quote:
|
Originally Posted by borry
can you run a turbo off a flash tune ? or would an aftermarket unit still be needed
|
the factory MAP sensor only has a range of 1-bar, and most of that range is used to measure vacuum but you can replace it with a 3-bar MAP sensor and then re-scale the load tables to suit.. with the SCT-based edit, you can change the data in the tables as well as the values on the tables X and Y axis... just need a 2 or 3-bar map sensor and the edit.. so yes you can use the edit for forced induction...
OR
get something like the JMM interceptor that has its own MAP sensor....