Quote:
|
Originally Posted by Steve_T
With the weld being towards the end of the stud thread, it cannot come out completely but it can still come out at least several mm's if it loosens up before the weld stops it coming out further. If the stud is uniform diameter over it's whole length, then when it loosens a few mm's the rack bracket/boss can move loosely on it thus there is no more tension on the nut holding the rack on so what stops the nut falling off the stud and therefore the rack falling off?
Steve.
|
Steve, from what I saw, the weld will not allow the stud to work it's way loose. Wish I had the camera with me when I was shown the AU3 on the hoist, would be much easier to explain.
Anyone with a late AUII or AUIII, or better yet, someone who's had the weld done, could you please post a pic of it please? *looks at JC* LOL..